Glossary entry (derived from question below)
English term or phrase:
corner radius
Serbian translation:
poluprečnik [zaobljenosti] ugla
Added to glossary by
Aleksandar Medić
Apr 3, 2008 09:03
16 yrs ago
6 viewers *
English term
corner radius
English to Serbian
Tech/Engineering
Electronics / Elect Eng
power transformer
Kontekst:
Compressive stress on radial spacers is calculated by considering the area covered by the bare conductors and by neglecting any effect relating to their CORNER RADIUS.
Compressive stress on radial spacers is calculated by considering the area covered by the bare conductors and by neglecting any effect relating to their CORNER RADIUS.
Proposed translations
(Serbian)
4 +2 | poluprečnik [zaobljenosti] ugla | Aleksandar Medić |
4 | ugaoni radijus | sofijana |
Change log
Apr 3, 2008 09:55: Aleksandar Medić Created KOG entry
Proposed translations
+2
33 mins
Selected
poluprečnik [zaobljenosti] ugla
The corner radius is a widely overlooked feature within Flash. It is a setting that determines the roundness of the corners of rectangles and squares.
http://www.knowflash.com/content/view/98/27/
--------------------------------------------------
Note added at 36 mins (2008-04-03 09:40:29 GMT) Post-grading
--------------------------------------------------
5. QUESTION: Why is a corner radius important on a toroid?
ANSWER: A radius is important on a toroid because if the core has sharp edges, the wire insulation could be scraped during the rigorous winding operation. MAGNETICS takes special pains to insure that toroids have some radius.
http://www.mag-inc.com/pdf/cg-05.pdf
http://www.knowflash.com/content/view/98/27/
--------------------------------------------------
Note added at 36 mins (2008-04-03 09:40:29 GMT) Post-grading
--------------------------------------------------
5. QUESTION: Why is a corner radius important on a toroid?
ANSWER: A radius is important on a toroid because if the core has sharp edges, the wire insulation could be scraped during the rigorous winding operation. MAGNETICS takes special pains to insure that toroids have some radius.
http://www.mag-inc.com/pdf/cg-05.pdf
4 KudoZ points awarded for this answer.
38 mins
ugaoni radijus
"....određivanje topocentričnog ugaonog radijusa..."
"... geocentričnog rastojanja i ugaonog radijusa..."
"... geocentričnog rastojanja i ugaonog radijusa..."
Something went wrong...